Ph 03 9775 1889

find us on facebook

534 Frankston - Dandenong Road, 

Carrum Downs.  3201

 

Brush panel fencing  provides a long lasting alternative to traditional fencing and walls, provides noise absorption for traffic and other unwanted noise, is well suited for 'do it yourself' installation. We can also recomend an installer.

Enquire now for your quote or advice.

For ease of handling standard panels are 1800 wide although various width panels can be manufactured. There are two standard heights produced, the 1800 high panel has 8 galvanised wires each side of the panel with individual galvanised staples holding the wires together. An identical wire and stitching method for the 1500 high panels. Only with 7 wires across the panels.

The wire spacing allows for both size panels to be cut horizontally to either 900 or 750 in heights across the face. The panel can be reduced in width to any size required. The panels can be successfully butt joined end to end to give the appearance of one continuous panel. The 1800 x 1800 x 50mm nominal panel weight varies on seasonal conditions but is usually about 65 Kg.

The density of the panel allows for various fixing methods to be used, screwing the panels directly on to the timber, post and rails, clipping to strained wires or fitting into a metal U frame system. All brush fences should always have a capping to protect the exposed top of the panels, whether this is a metal, timber or brush roll cap is a matter of personal choice.